Six-blade cap cotton Vintage shabby light blue (10040) - фото 1 - Blanks for sublimation
Six-blade cap cotton Vintage shabby light blue (10040) - фото 2 - Blanks for sublimation
Six-blade cap cotton Vintage shabby light blue (10040) - фото 3 - Blanks for sublimation
Six-blade cap cotton Vintage shabby light blue (10040) - фото 4 - Blanks for sublimation
  • Six-blade cap cotton Vintage shabby light blue (10040) - фото 1 - Blanks for sublimation
  • Six-blade cap cotton Vintage shabby light blue (10040) - фото 2 - Blanks for sublimation
  • Six-blade cap cotton Vintage shabby light blue (10040) - фото 3 - Blanks for sublimation
  • Six-blade cap cotton Vintage shabby light blue (10040) - фото 4 - Blanks for sublimation
  • Six-blade cap cotton Vintage shabby light blue (10040) - фото 1 - Blanks for sublimation
  • Six-blade cap cotton Vintage shabby light blue (10040) - фото 2 - Blanks for sublimation
  • Six-blade cap cotton Vintage shabby light blue (10040) - фото 3 - Blanks for sublimation
  • Six-blade cap cotton Vintage shabby light blue (10040) - фото 4 - Blanks for sublimation

Six-blade cap cotton Vintage shabby light blue (10040)

(0)
Color: Light blue
In stock
Price:
189.00 грн
Product in cart
  • The date of shipment of the goods: tomorrow (23.11.2026)
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Six-blade cap cotton Vintage shabby light blue (10040)

Vintage washed cotton cap for DTF, flex and embroidery

 

A six-panel cotton cap washed so that the colour is slightly uneven and the seams and visor edge look worn, like a well-loved cap. Logos go onto the front with a DTF transfer or flex on a cap heat press, or are embroidered.

Cottonwashed, with a worn look
6 panelsa seam down the middle of the front
56 cmhead size
Metal buckleadjusts the fit at the back

Is this cap right for you

 
You apply DTF transfers, flex or embroidery
You have a cap heat press or a cap platen
The shade and worn detailing may vary slightly from cap to cap
You print with sublimation — take a trucker cap with a white polyester front

Sizes and transfer settings

 
up to 10 × 5.5 cmdesign under the cap press heater
1–1.5 cmfrom the visor seam to the design
contact beside the seamthe seam may prevent adhesion; test before production
Temperature
150–160 °Creference for DTF and flex
Time
10–15 sfollow the film manufacturer's instructions
Pressure
mediumreference only; follow the film's pressure instructions

These are starting settings: the film maker gives the exact ones, and they are tuned to your press and room conditions — temperature and humidity.

Why this cap

 

A worn-in look

Uneven colour and wear along the seams give the cap character, so even a simple logo looks good

Several ways to decorate

DTF gives full colour and fine detail, flex gives crisp one-colour lettering, embroidery gives a raised logo

One cut in many colours

A team can wear caps of different colours with the same fit

How to apply a logo

 
 
Prepare the transfer
A DTF transfer or cut flex up to 10 × 5.5 cm; place the bottom of the design 1–1.5 cm above the visor seam.
 
Heat the press
Fit the cap platen. Use the film manufacturer's settings; 150–160 °C for 10–15 s is only a starting reference.
 
Put the cap on the form
Fold the sweatband out, pull the cap over the lower form with the visor towards you and fasten the buckle: the front must sit tight, without folds.
 
Pre-press the front
Follow the chosen film's pre-press instructions and check how the fabric responds on a test cap.
 
Place the transfer
In the centre of the front, symmetrically to the seam; tack the edges with heat tape if needed.
 
Key step
Press
Use the temperature, time and pressure specified in the chosen film's instructions.
 
Peel the film
Hot or after cooling — as stated for your film.
Tip: Test the first piece; peel according to the film instructions and check adhesion around every edge, especially on both sides of the centre seam. Note the setting that worked; change one setting at a time.

Vintage caps: what to choose

 
VariantFeatureHead sizeStrap
Six-panel, light blueYou are hereclassic cut56 cmmetal buckle
Kids, dark greysmaller size51 cmmetal buckle
Mesh back, beigemesh rear panels56 cmmetal buckle
Ponytail, blueopening at the back for hair56 cmmetal buckle
Visor, blackno crown56 cmhook-and-loop

Where it works best

 
Brand or café merch
A low-key cap with a small logo for staff and for sale
Team and event
Caps of one cut in different colours for a tournament, hike or festival
Personal gift
Lettering, initials or a date on the front

What can go wrong

 
The design lifts at an edge

Cause: possible uneven contact beside the seam, unsuitable settings or an incorrect peel method

Fix: check contact on both sides of the seam, the transfer's suitability for cotton and its application instructions; make a fresh test after correcting the cause
A stripe below the design

Cause: the sweatband stayed under the front

Fix: fold the sweatband out before pressing
The design is crooked

Cause: the cap sat askew on the form

Fix: straighten the cap on the form: the front seam in the middle of the heater
A shiny mark from the heater

Cause: possible overheating or a pressure mark

Fix: check temperature, time, pressure and surface protection against the film instructions; if overheating is confirmed, reduce one setting within the permitted limits on a fresh test cap

Questions and answers

 

Can I print it with sublimation?

No: sublimation ink holds on polyester, and this cap is cotton. For sublimation, take a trucker cap with a white polyester front.

How do I apply a logo?

With a DTF transfer or flex on a cap press, or embroider it. DTF gives full colour, flex gives one-colour lettering and numbers.

Why keep the design within 10 × 5.5 cm?

The cap press heater is about 8 × 15 cm, and it is its centre that presses evenly, so the logo goes in that zone.

What size is the cap?

A 56 cm head size, an adult size; for children there is the same cap in 51 cm.

What you need

 

A press and materials for applying a logo.

Характеристики Six-blade cap cotton Vintage shabby light blue (10040)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product