Cap with a straight visor snapback red (7980) - фото 1 - Blanks for sublimation
Cap with a straight visor snapback red (7980) - фото 2 - Blanks for sublimation
Cap with a straight visor snapback red (7980) - фото 3 - Blanks for sublimation
  • Cap with a straight visor snapback red (7980) - фото 1 - Blanks for sublimation
  • Cap with a straight visor snapback red (7980) - фото 2 - Blanks for sublimation
  • Cap with a straight visor snapback red (7980) - фото 3 - Blanks for sublimation
  • Cap with a straight visor snapback red (7980) - фото 1 - Blanks for sublimation
  • Cap with a straight visor snapback red (7980) - фото 2 - Blanks for sublimation
  • Cap with a straight visor snapback red (7980) - фото 3 - Blanks for sublimation

Cap with a straight visor snapback red (7980)

(0)
Color: Red
In stock
Price:
164.00 грн
Product in cart
  • The date of shipment of the goods: 2026-11-23
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Cap with a straight visor snapback red (7980)

A flat-visor snapback cap for embroidery

 

Create branded or team caps with an embroidered logo or lettering. Small designs can also be applied with a DTF transfer or flex on a cap heat press.

For embroideryon a machine with a cap frame
Flat visorin the cap colour
56 cmhead circumference
Plastic snap strapsnapback, adjusts the fit at the back

Is this cap right for you

 
You embroider on a machine with a cap frame
You need a flat-visor cap with a snapback strap
There is a seam down the centre of the front: run solid fills across the centre at an angle to the seam and stitch elements from the centre outwards
Apply DTF or flex on a cap press with a pillow under the front: without support, the seam and the stiff front give uneven pressure
You need full-colour sublimation printing — take the white polyester five-panel cap made for sublimation

Sizes and embroidery area

 
Polyestercap fabric
6 panelsseam down the centre of the front
up to 5–6 × 12–14 cmguide to the front embroidery area; the cap frame sets the limit
75/11sharp needle for the stiff front and the seam

The embroidery limit and density are set by your machine's cap frame and program, and the DTF or flex settings by the film's instructions; run a test on the same cap before a production run.

Why this cap

 

Matching details

The top button, stitched eyelets and plastic snap strap match the cap colour

Snapback silhouette

A flat visor and a high front — a streetwear and merch classic

How to embroider a logo

 
 
Prepare the program
Digitise the logo for a cap: solid fills at an angle to the centre seam, never parallel to it; stitch elements from the centre outwards, alternating over the seam.
 
Check the size
The design must fit the field of your machine's cap frame; a guide for the front is up to 5–6 cm high and 12–14 cm wide.
 
Add backing if needed
For dense fills, position cap backing under the front before hooping; light lettering on a structured front often needs little or no backing.
 
Hoop the cap
Use a cap hooping station, centre the front seam in the frame and secure the cap together with any backing.
 
Fit the needle
A sharp 75/11: on a stiff front and a seam, a ballpoint needle can deflect and break.
 
Key step
Stitch a test cap
Check that the front has not puckered and that the stitches lie evenly over the seam, then start the run.
 
Or apply a transfer
DTF or flex on a cap press with a pillow under the front; settings from the film's instructions.
Tip: Keep the program and settings that worked on the test cap for the production run; change one setting at a time.

Snapback caps: which to choose

 
VariantColourHead sizeStrap
Snapback, redYou are hereOne colour56 cmPlastic snap strap
Snapback, red with a black visorVisor in a second colour56 cmPlastic snap strap
Snapback, blackOne colour56 cmPlastic snap strap
Snapback, blueOne colour56 cmPlastic snap strap

Where it works best

 
Brand or shop merch
An embroidered logo on caps of one model in several colours
Teams and clubs
An emblem on the front, caps in the team colours
Promotions and events
A partner logo on caps for staff or participants

What can go wrong

 
The front puckers

Cause: a dense fill without support, or a fill parallel to the seam

Fix: a stabiliser under the front, fills at an angle to the seam, elements from the centre outwards
Needles break

Cause: the point deflects on the seam and the stiff front

Fix: a sharp 75/11 needle
The embroidery is off-centre

Cause: the cap sat crooked in the frame

Fix: centre seam in the middle of the frame, visor held tight
The transfer lifts at the seam

Cause: uneven pressure on the seam and the stiff front

Fix: a pillow under the front, contact over the whole design, settings from the film's instructions

Questions and answers

 

Can I print this cap with sublimation?

This model is made for embroidery and heat transfer. For full-colour sublimation, choose a cap made for it, such as the white polyester five-panel cap.

What is the largest embroidery size?

Your machine's cap frame sets the limit; a guide for the front is up to 5–6 cm high and 12–14 cm wide. A logo 6–8 cm wide usually looks balanced on the front.

Does the centre seam on the front get in the way?

Not if the program allows for it: run solid fills at an angle to the seam and stitch elements from the centre outwards, alternating over it.

How else can I apply a logo?

With a DTF transfer or flex on a cap press with a pillow under the front. Take the settings from the chosen film's instructions and make the first cap a test piece.

What size is the cap?

Head circumference 56 cm, an adult size; a plastic snap strap at the back adjusts the fit.

What you need

 

Embroidery materials, plus equipment if you apply the logo on a press.

Характеристики Cap with a straight visor snapback red (7980)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product