Five-panel cap for sublimation suede black with black mesh (12059)
Color: Black
In stock
- The date of shipment of the goods: tomorrow (23.11.2026)
- Ask a question for this product
Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.
- Return guarantee
We guarantee a refund if you are not satisfied with the product
- Доставка
Delivery across Ukraine to any settlement
Description Five-panel cap for sublimation suede black with black mesh (12059)
A suede cap with a white front for sublimation
Create team merchandise or a personalised gift with your own photo, emblem or lettering.
White frontfor full-colour sublimation
190 °Cstarting settings, 50 s
56 cmhead circumference
Plastic snapadjusts the fit at the back
Is this cap right for you
You print with sublimation ink on sublimation paper
You have a cap heat press or a cap platen
Only the white front takes the colour: the visor and mesh keep their own colour, so plan the design within the front
The front has a nap: keep medium pressure and check on a test cap that the nap is not flattened
You need a cap without a white front for DTF or flex — consider the black suede cap with black mesh
Sizes and decoration area
Front without a seama centred design does not cross a seam
Suedenapped surface of the front and visor
Meshside and back panels
Temperature
190 °Cstarting point for the white front in a cap press
Time
50 safter a 5 s pre-press of the front
These are MyPrint's starting settings for a white cap front made for sublimation. Tune the exact values to your press, paper and ink on a test cap.
How to apply a logo
Print mirrored
With sublimation ink on sublimation paper, sized to the white front.
Pre-press the front
5 seconds on the cap platen to flatten and dry the front.
Fix the paper
At the centre of the front, with heat-resistant tape along the edges; keep the design off the visor and mesh.
Key step
Press
Starting settings — 190 °C, 50 seconds, medium pressure.
Remove the paper
Straight away, in one motion.
Tip: Make the first cap of a batch a test piece: if pale, add 10 s; if the design blurs or the nap flattens, reduce the time or pressure. Change one setting at a time.
Corduroy and suede caps: which to choose
| Variant | Material | Panels | Strap |
|---|---|---|---|
| White front, black visor and meshYou are here | White front for sublimation | 5 panels | Plastic snap |
| White front, orange visor, brown mesh | White front for sublimation | 5 panels | Plastic snap |
| Suede with mesh, black with black mesh | Suede and mesh | 5 panels | Plastic snap |
| Suede with mesh, red with black mesh | Suede and mesh | 5 panels | Plastic snap |
Where it works best
Photo merch
A full-colour logo or photo on the white front
Teams and clubs
An emblem in the team colours
A gift
A photo or lettering on a cap for one person
What can go wrong
A pale design
Cause: underheating or weak paper contact
Fix: a pillow under the front, add 10 s on the next cap
Flattened nap, a press mark
Cause: pressure too strong
Fix: medium pressure, without excessive force
The design blurred
Cause: overheating
Fix: reduce the time
The design ran onto the visor
Cause: the paper is larger than the front
Fix: keep the design within the white front
Questions and answers
What are the print settings?
MyPrint's starting settings for a white cap front made for sublimation are 190 °C, 50 seconds, medium pressure, after a 5 s pre-press. The exact values depend on the press, paper and ink, so make the first cap a test piece.
Do the visor and mesh take the print?
The colour shows only on the white front; the visor and mesh keep their own colour, so plan the design within the front.
Can I apply DTF or embroidery?
Yes, on the front: DTF or flex on a cap press with the film card's settings, embroidery on a machine with a cap frame.
What size is the cap?
Head circumference 56 cm, an adult size; a plastic snap at the back adjusts the fit.
What you need
Equipment and materials for the decoration method you choose.
equipmentCP3815 2-in-1 cap heat presscap platen plus a flat 12 × 12 cm platenequipmentHP Mini CP manual cap heat press8.3 × 16 cm heatermaterialPremium Classic A4 sublimation paperfor printing the transfermaterialSubliPro sublimation inks, 4 × 100 mlfor printing the designaccessoryBrown heat tape, 10 mmkeeps the transfer from shiftingcategoryAll caps for sublimation and heat transferother models and colours
Характеристики Five-panel cap for sublimation suede black with black mesh (12059)
- Type:For sublimation
- Kind:Five-panel with mesh
- Color:Black
- Material:Suede
- For whom:Unisex
- Head circumference:56 cm
- Strap type:Plastic adjustable
You may also like it
Recently viewed














































