Cap visor unisex cotton Vintage shabby beige (10269) - фото 1 - Blanks for sublimation
Cap visor unisex cotton Vintage shabby beige (10269) - фото 2 - Blanks for sublimation
Cap visor unisex cotton Vintage shabby beige (10269) - фото 3 - Blanks for sublimation
  • Cap visor unisex cotton Vintage shabby beige (10269) - фото 1 - Blanks for sublimation
  • Cap visor unisex cotton Vintage shabby beige (10269) - фото 2 - Blanks for sublimation
  • Cap visor unisex cotton Vintage shabby beige (10269) - фото 3 - Blanks for sublimation
  • Cap visor unisex cotton Vintage shabby beige (10269) - фото 1 - Blanks for sublimation
  • Cap visor unisex cotton Vintage shabby beige (10269) - фото 2 - Blanks for sublimation
  • Cap visor unisex cotton Vintage shabby beige (10269) - фото 3 - Blanks for sublimation

Cap visor unisex cotton Vintage shabby beige (10269)

(0)
Color: Beige
In stock
Price:
187.00 грн
Product in cart
  • The date of shipment of the goods: tomorrow (23.11.2026)
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Cap visor unisex cotton Vintage shabby beige (10269)

Vintage cotton visor for DTF, flex and embroidery

 

A logo or lettering goes on the front band with a DTF transfer or flex on a cap heat press, or is embroidered.

Cottonwashed, with a worn effect
Toplessopen crown
56 cmhead size
Hook-and-loop strapadjusts the fit at the back

Is this visor right for you

 
You apply DTF transfers, flex or embroidery
You have a cap heat press or a cap platen compatible with your press; the heater must cover the whole design and the band must lie against the form without folds
The design must fit the height of the front band; check its size by trying a sheet on the visor
You print with sublimation — choose a sublimation visor with a white band

Sizes and transfer settings

 
band heightlogo or lettering on the front band
1–1.5 cmfrom the visor seam to the design
Temperature
150–160 °Creference for DTF and flex
Time
10–15 sfollow the film manufacturer's instructions
Pressure
mediumreference only; follow the film's pressure instructions

These are starting settings: the film maker gives the exact ones, and they are tuned to your press and room conditions — temperature and humidity.

Why this visor

 

A worn-in look

Uneven colour and wear along the seams give the visor character, so even a simple logo looks good

Several ways to decorate

DTF gives full colour and fine detail, flex gives crisp one-colour lettering, embroidery gives a raised logo

One cut in several colours

A team can wear visors of different colours with the same fit

How to apply a logo

 
 
Prepare the transfer
Hold a sheet against the front band and mark the height for the DTF transfer or flex; place the bottom of the design 1–1.5 cm above the visor seam.
 
Heat the press
Fit the cap platen and use the settings in the film instructions; 150–160 °C for 10–15 s is only a starting reference. Wait until the press reaches the set temperature.
 
Put the visor on the form
Fold the sweatband out, pull the visor over the lower form with the peak towards you and fasten it at the back: the band must sit tight, without folds.
 
Pre-press the front band
Follow the chosen film's pre-press instructions and check how the fabric responds on a test visor.
 
Place the transfer
In the centre of the band; tack the edges with heat tape if needed.
 
Key step
Press
Use the temperature, time and pressure specified in the chosen film's instructions.
 
Peel the film
Hot or after cooling — as stated for your film.
 
Cool the visor
Let it cool completely before packing.
Tip: Test the first visor of each batch; after peeling the film as stated for it, check that every edge of the design has bonded. Record the settings that worked; change one setting at a time.

Vintage visor or cap: which to choose

 
VariantFeatureHead sizeStrap
Vintage visor, beigeYou are heretopless56 cmhook-and-loop
Vintage six-panel cap, beigeclassic cut56 cmmetal buckle
Vintage six-panel mesh cap, beigelight beige mesh at the back56 cmmetal buckle
Vintage ponytail cap, beigeopening at the back for hair56 cmmetal buckle

Where it works best

 
Tennis club and running
Logo visors for participants and coaches
Beach and summer events
Logo visors for outdoor promotion
Personal gift
Lettering or initials on the front band

What can go wrong

 
The edge of the design lifts

Cause: possible uneven contact, unsuitable settings or peel method

Fix: check contact across the whole design, the transfer's suitability for cotton and its application instructions; after correcting the cause, make a new test
A band under the design

Cause: the sweatband stayed under the front of the visor

Fix: fold the sweatband outwards before pressing
The design is crooked

Cause: the visor sat on the form at an angle

Fix: straighten the visor on the form: centre the front band under the heater
A shiny mark from the heater

Cause: possible overheating or a pressure mark

Fix: check the temperature, time, pressure and surface protection against the film instructions; if overheating is confirmed, reduce one setting within the permitted range on a fresh test visor

Questions and answers

 

Can I print it with sublimation?

No: sublimation ink bonds with polyester, and this visor is cotton. For sublimation, choose a visor with a white polyester band.

What do I apply the logo with?

A DTF transfer or flex on a cap press, or embroidery. DTF gives full colour, flex gives one-colour lettering and numbers.

What size should the design be?

Fit the design within the height of the front band. Check the final size on the visor fitted to the press: the heater must cover the whole design within the area of even contact.

What size is it?

Head circumference 56 cm; a hook-and-loop strap at the back adjusts the fit.

What you need

 

A press and materials for applying a logo.

Характеристики Cap visor unisex cotton Vintage shabby beige (10269)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product