2D Silicone (TPU) Sublimation Case with Flexible Plate for iPhone 7 Plus / 8 Plus Black (4379)

To apply an image to a silicone case, you will need:

• Tabletop heat press, universal heat press, or 3D heat press;
• A printer filled with sublimation ink;
• Sublimation paper;
• Thermal tape;
• 2D Silicone (TPU) Sublimation Case with Flexible Plate for iPhone 7 Plus / 8 Plus Black

The process of printing on a silicone case using sublimation consists of several steps:

1. Print the prepared image onto sublimation paper. Keep in mind that the image should be printed in reverse. You can mirror the photo or image in a graphics editor, but it is more convenient to select the appropriate option in the print settings.
2. Allow the sublimation paper to dry. If printing was done on matte photo paper, this step can be skipped, as the ink is absorbed almost instantly.
3. Cut out the image and attach it to a plastic plate using thermal tape. Don't forget to remove the protective film from the plate beforehand.
4. Place our blank in a heat press and press the start button to begin the countdown.
5. After the set time has elapsed, a sound signal will sound. Remove the plate, remove the paper, and let it cool.
6. Remove the protective film from the case blank, under which a layer of adhesive is applied, and attach the plate to the case.

The process is complete. 2D Silicone (TPU) Sublimation Case with Flexible Plate for iPhone 7 Plus / 8 Plus Black is now not just a blank, but a finished product with a unique image or photo.