Sublimation case 2D silicone (TPU) for iPhone 13 Pro (6.1) transparent (8183)

To apply an image to a silicone case, you will need:

• A tablet heat press, universal heat press, or 3D heat press;
• A sublimation printer with sublimation inks;
• Sublimation paper;
• Heat-resistant tape;
• Sublimation case 2D silicone (TPU) for iPhone 13 Pro (6.1) transparent

The sublimation printing process for a case consists of several steps:

1. Print the prepared image onto the sublimation paper. Keep in mind that the image should be printed in mirror image. You can reflect the photo or image in a graphics editor, but it is more convenient to mark it in the appropriate field in the print settings.
2. Allow the sublimation paper to dry. If printing was done on matte photo paper, this step can be skipped, as the ink is practically instantly absorbed into the paper.
3. Cut out the image and secure it to a metal plate using heat-resistant tape. Don't forget to remove the protective film from the plate beforehand.
4. Place the plate in a heat press and press the start button to begin the countdown timer.
5. After the set time has elapsed, a sound signal will sound. Remove the plate, peel off the paper, and allow it to cool.
6. Remove the protective film from the case blank, under which a layer of adhesive is applied, and attach the plate to the case.

The process is complete. Sublimation case 2D silicone (TPU) for iPhone 13 Pro (6.1) transparent is now not just a blank, but a finished product with a unique image or photo.