Beer glass for sublimation white with gold rim (650 ml) (6073) - фото 1 - Blanks for sublimation
Beer glass for sublimation white with gold rim (650 ml) (6073) - фото 2 - Blanks for sublimation
Beer glass for sublimation white with gold rim (650 ml) (6073) - фото 3 - Blanks for sublimation
  • Beer glass for sublimation white with gold rim (650 ml) (6073) - фото 1 - Blanks for sublimation
  • Beer glass for sublimation white with gold rim (650 ml) (6073) - фото 2 - Blanks for sublimation
  • Beer glass for sublimation white with gold rim (650 ml) (6073) - фото 3 - Blanks for sublimation
  • Beer glass for sublimation white with gold rim (650 ml) (6073) - фото 1 - Blanks for sublimation
  • Beer glass for sublimation white with gold rim (650 ml) (6073) - фото 2 - Blanks for sublimation
  • Beer glass for sublimation white with gold rim (650 ml) (6073) - фото 3 - Blanks for sublimation

Beer glass for sublimation white with gold rim (650 ml) (6073)

(0)
Volume:
Not available
Price:
296.00 грн
  • Buy a box24 штук - 7104 грн
  • Report availability
  • Ask a question for this product

Payment Cash, Visa/MasterCard, Payment in installments, Instant installments, Cashless settlement.
Delivery By new mail to the branch, post machine or courier at carrier rates.

  • Return guarantee

    We guarantee a refund if you are not satisfied with the product

  • Доставка

    Delivery across Ukraine to any settlement

Description Beer glass for sublimation white with gold rim (650 ml) (6073)

A white gold-rim beer stein for photos, lettering and logos

 

A 650 ml ceramic beer stein with a white gloss sublimation coating: a thin gold line under the lip and another at the base, and raised beaded bands near the top and bottom of the body. The print sits on the smooth middle zone between the bands; the gold and the relief stay outside the print area, and unprinted areas stay white. At Ø 8 cm it is within the range of a standard 11 oz heater (7.5–9 cm), but the heater has to fit between the bands and wrap the smooth zone closely; if it is taller than that zone, the stein is printed in an oven with shrink film. Makers recommend a longer time for beer steins than for a regular mug: the starting range in a press is 180–200 °C for 200–300 seconds, then the settings are tuned on a test stein.

650 mlvolume
Gold linesunder the lip and at the base
180–200 °Cpress start, 200–300 s
Smooth zoneprint area between the beaded bands

Is this stein right for you

 
You have a mug press whose heater fits between the beaded bands and wraps the smooth zone closely, or a sublimation oven with shrink film
You print with sublimation ink on sublimation paper
You need a festive gold-trimmed beer stein with a photo, lettering or a logo
A heater cannot wrap the beaded bands closely — keep the design on the smooth zone between them and check that the heater fits between the bands before the first print
The stein will go in a dishwasher or a microwave — the gold lines can wear off in a dishwasher and cause sparking in a microwave

Size and print settings

 
Ø 8 cmbody diameter
11 oz heaterstandard, for 7.5–9 cm
Ovenstarting point: 180–200 °C, 13–15 min with film
Temperature
180–200 °Cstarting range in a press
Time
200–300 sfirst trial in the middle of the range
Pressure
mediumthe press handle closes easily and the stein does not turn

This starting range for a test print combines MyPrint's guide for a large mug (200 °C, 200 s) with makers' data for ceramic beer steins (180 °C, 300 s; 13–15 minutes in an oven). Tune the exact settings on a test stein to your press or oven, paper, ink and room conditions — temperature and humidity.

Why this stein

 

A festive look

Gold lines and beaded bands make a classic gift stein

A white background for photos

Photos, full-colour designs and text sit on a white background; check the colours on a test stein

From file to finished stein

 
 
Prepare the layout
Measure the height of the smooth zone between the bands on the stein itself and the usable width, allowing clearance beside the handle; keep the design off the bands and the gold.
 
Print mirrored
With sublimation ink on sublimation paper.
 
Fix the paper
Tightly on the smooth zone, leaving clearance beside the handle, and secure it with heat-resistant tape along the edges; do not cover the gold lines with paper.
 
Place it in the heater
The 11 oz heater fits between the bands and wraps the smooth zone closely, with the handle outside; if it does not fit, print in an oven with film.
 
Key step
Press
Starting range — 180–200 °C, 200–300 seconds, medium pressure; make the first trial in the middle of the range.
 
Remove the paper
Right after the signal, wearing heat-resistant gloves.
 
Let it cool
Ceramics hold heat for a long time; pack the stein once it has cooled completely.
Tip: Make the first stein from a new batch a test piece. If it is pale, check heater and paper contact, then add 20–30 s; if the design blurs or the white yellows, shorten the time. Change one setting at a time.

Beer stein or regular mug: which to choose

 
VariantShapeVolumePrinting equipment
Gold-rim beer stein, 650 mlYou are hereGold lines, beaded bands650 ml11 oz heater between the bands, or oven
Clear glass beer mug with a print area, 500 mlGlass mug, white print area500 ml11 oz heater
White mug 15 oz, 425 mlCylindrical425 ml15 oz heater
Large white mug 32 oz, 950 mlCylindrical950 ml32 oz heater

Where it works best

 
A holiday gift
A name or lettering on a festive gold-trimmed stein
Pubs and breweries
The venue's logo on steins for guests
Anniversaries and corporate events
Personalised steins for the team or guests

What can go wrong

 
Pale bands at the top or bottom of the design

Cause: the heater sat on the beaded bands and did not press the smooth zone

Fix: keep the design between the bands; if the heater does not fit, print in an oven
Pale patches around the body

Cause: the heater does not wrap the body closely

Fix: check contact; a gap cannot be fixed with more time
Pale all over

Cause: underheating: a large stein takes longer to heat

Fix: add 20–30 s on the next trial
The design blurred or the white yellowed

Cause: overheating

Fix: shorten the time on the next trial
A shadow or a double image

Cause: the paper shifted

Fix: tape the edges, and in an oven use tight film

Questions and answers

 

What are the print settings for this stein?

A beer stein needs more time than a regular mug: MyPrint's guide gives 200 °C for 200 seconds for a large 425 ml mug, and makers of ceramic beer steins give 180 °C for 300 seconds. Start in the middle of that range on a test stein: if it is pale, add 20–30 s; if the design blurs or the white yellows, shorten the time.

Which heater does it need?

A standard 11 oz mug heater for 7.5–9 cm, for example in the AP1803 press. Before the first print, check that it fits between the beaded bands, wraps the smooth zone closely and covers the full design height. If the heater is taller than the smooth zone, print in an oven.

Can it be printed in an oven?

Yes, after checking the dimensions: wrap the smooth zone in paper, fit shrink film or a silicone stein wrap of the right size and check that the stein fits inside the oven chamber. A starting point from makers of ceramic beer steins is 180–200 °C for 13–15 minutes in a preheated oven; confirm it on a test stein. If the print is pale, first check warm-up and even paper contact, then gradually increase the time on the next trial; if the design blurs or the white yellows, shorten the time. Change one setting at a time. Remove the film and paper right after transfer, wearing heat-resistant gloves.

How should the stein be cared for?

Wash it by hand with a soft sponge and no abrasives: the gold lines can wear off in a dishwasher. Keep it out of the microwave — the gold sparks there. Pass this advice on to the customer together with the stein.

What you need for printing

 

Equipment and materials for printing on a beer stein.

Характеристики Beer glass for sublimation white with gold rim (650 ml) (6073)

Customer reviews  (0)Leave a review
Customer reviews  (0)

You have already rated this product