Thermal transfer film My Print Sublifabric for sublimation printing of satins 1 pc. m. (1*0.5 m) (7686)

Thermotransfer film My Print Sublifabric for sublimation printing of satins is used for making chevrons, applying images, logos on textiles. For this you will need: a printer filled with sublimation ink, sublimation paper, a cutting plotter or scissors and a thermal press.

Printing using My Print Sublifabric thermal transfer film consists of several stages:

1. We print the prepared image on sublimation paper (in mirror image) using a sublimation printer.
2. Cut out the printed image.
3. Using a plotter or scissors, cut the film along the contour of the image.
4. Separate the element cut along the contour of the image from the film substrate.
5. We place the fabric, the contour-cut film and the image (face to the film) in the thermopress.
6. We bake at a temperature of 185-195 degrees for 40 seconds.
7. After the set time has elapsed, a beep will sound. We take out the blank, remove the paper.

The process is complete.

Plotter settings for cutting My Print Sublifabric thermal transfer film for sublimation satin printing:
Knife length: 2.
Pressure: 200 g.
Speed: 200 mm/s.