Before 1 September a print shop has two kinds of order: class runs and single gifts. A class orders one design with the names of 20–35 children — badges, T-shirts, bottles, notebooks — while parents buy one gift for the teacher: a mug in a box or a frame with the class photo. Take class orders with a complete name list until Friday 21 August, and plan for the parcels to be at the branches on 28 August: the last Nova Poshta dispatches are 25 August to remote places, the 26th between oblast centres and the 27th within one city.
1 September 2026 is a Tuesday: under the Cabinet of Ministers resolution of 1 July, the 2026/2027 school year starts on that day.
What to print for a class
A class run is one template in which only the name changes. Take items that are easy to repeat 30 times: badge blanks, sublimation T-shirts, water bottles and sublimation notebooks.

The insert is a 54 mm circle of paper up to 120 g/m², with a pin on the back. They are assembled on the My Print Standart Pro press with a 44 mm die: the die is the same Standart class as the blank. For a run, a 44 mm circle punch cuts the circles faster than scissors.

White, two-layer, 200 g/m². Printed on a 38 × 38 cm flat heat press: 190–200 °C, 45–60 s. For the teacher, an adult two-layer T-shirt, XS–XXXL.

400 ml bottle with a carabiner
Metal, glossy, 6.4 cm in diameter. It is pressed in a thermos heating element for 6–7 cm diameters; check its fit with your press with a MyPrint manager. Advise the buyer to wash the bottle by hand.

Laminated eco-leather cover, printed on a flat press like the T-shirts. A larger one is 21 × 14.5 cm, 100 sheets.

The design is the same on every T-shirt and only the name changes, so the run is approved with one layout.
A gift for a teacher or a first-grader
One gift does not tie up the heat press for long: a mug spends 3 minutes in the heater, so accept it no later than the day before its route's dispatch day, and up to Monday 31 August for pick-up. For a single gift, offer sublimation mugs in a box, sublimation photo frames with the class photo or mouse pads.

330 ml mug in an individual box
White ceramic, sold together with its box. Mug heat press: 180–200 °C, 180 s.

Acrylic frame with a backlight
3 mm acrylic, 150 × 99 mm, a wooden stand with a backlight. With the class photo inside, it is a gift to the teacher from everyone.

3 mm thick, printed on a flat press. A gift for a computer science teacher or an older pupil.

A mug in an individual box goes to the buyer as soon as it has cooled after the press.
Acrylic frame: the order from its product card
- Print the photo unmirrored and let the print dry.
- Remove the protective film from the white side of the frame.
- Fix the print to the white side with heat-resistant tape.
- Press on a flat press: 180 °C, 100 s, light pressure, below medium.
- Remove the paper carefully.
- Cool the frame under a cold press or another flat weight so it does not warp.
- When the frame has cooled completely, remove the film from the other side.
Calendar to 1 September
The target is the parcel at the recipient's branch on Friday 28 August. Count the shop's working days and the delivery days separately.
| Date | What to do | Why |
|---|---|---|
| 12–14 AugWed–Fri | Samples: a badge with a name, a kids' T-shirt, a bottle, a mug in a box. Post their photos with the last order date, 21 August. Order blanks and paper. | Nova Poshta takes up to 3 days, and the blanks are needed by the first orders. |
| 17–21 AugMon–Fri | Take class orders: a list of names and sizes, a layout for approval. Print what is approved straight away. | The last week stays free for pressing and packing. |
| 21 AugFri | Last day to take class orders. | For remote places it is tight: layout on Friday, pressing on Monday, packing and dispatch on Tuesday. |
| 24 AugMon | Independence Day. If your shop is closed that day, take class orders for remote routes until Thursday 20 August. Check your branch's hours in the Nova Poshta app. | Without Monday, there is no day for pressing between the Friday layout and the Tuesday dispatch. |
| 25 AugTue | Last dispatch to remote places. | Nova Poshta standard term: up to 3 days. |
| 26 AugWed | Last dispatch between oblast centres and large cities. | Nova Poshta standard term: 1–2 days. |
| 27 AugThu | Last dispatch within one city. | Nova Poshta standard term: up to 1 day. |
| 28 AugFri | Parcels at the recipients' branches. Class orders collected from the shop. | Saturday and Monday stay as a buffer. |
| 29 AugSat | Buffer for late parcels; pick-up. | Since 1 August, Nova Poshta branches in oblast centres open at weekends from 8:00 to 19:00; branches in shopping centres keep their own hours. |
| 31 AugMon | Pick-up only: single gifts made within the day. | A parcel sent on Monday may arrive only on Tuesday. |
Closer routes leave a margin: a class order between oblast centres can still be taken on Monday the 24th, within one city on Tuesday the 25th, and for pick-up on Wednesday the 26th. But only into free press hours.
Why the target is Friday, not Saturday. Nova Poshta terms are standard, not a promise. A one-day delay from Friday lands on Saturday and still leaves Monday; from Saturday it lands on Sunday or already on 31 August. And a class run still has to be handed out to the children, which is what the weekend is for.
Before every dispatch, check the estimated delivery date for your route: the Nova Poshta website has a delivery time calculator for this. Choose a dispatch day for which Nova Poshta estimates delivery by 28 August. If you can no longer meet that date, arrange pick-up.
How long a run for 30 children takes
Example: 30 T-shirts and 30 badges with names
Inputs: a T-shirt takes 2–3 min including loading and unloading, of which 3–5 s is pre-pressing the fabric and 45–60 s is pressing at 190–200 °C; a hand badge machine assembles 50–80 badges an hour (the rate MyPrint gives for its machine); an A4 sheet holds 12–15 inserts of 54 mm, depending on the gap between circles.
With two people, one pressing T-shirts and the other assembling badges, the run takes as long as the longer job: 60–90 minutes. Time the first piece and use that time in your own calculation. Count bottles and notebooks the same way: test-piece time × quantity, rounded up. For a class of 20–35 children, the T-shirts take from 40 minutes to 1 h 45 min and the badges 15–42 minutes.
When several classes order at the same time, a queue builds up at the press. In 6 hours of net pressing, one press handles 4–6 runs of 30 T-shirts (360 ÷ 90 = 4, 360 ÷ 60 = 6). Ten classes in the last week mean 10–15 hours of pressing for the T-shirts alone, that is 2–3 working days. So announce 21 August as the last order day well in advance.
A run with names: six steps without mistakes
One list from one person
Ask the parents' committee for a spreadsheet: each name exactly as it should be printed, the T-shirt size, the items for each child. Make corrections only in that sheet, not in messages.
A layout with all the names, for approval
Make one template and fill in the names from the sheet with the data merge function of your graphics editor. Send one sheet with all the names and get a written “approved”. Print only after that.
Print at 100 % scale
Print badge inserts without mirroring. For T-shirts, mugs, bottles, notebooks and mouse pads, print the image mirrored on sublimation paper and let the print dry. Turn off fit-to-page scaling and check the 54 mm circle with a ruler on the first sheet of inserts. Put each child's list number in small print on the paper outside the design, so the items are easy to sort.

Inserts are printed in a grid on one sheet and punched out one by one, so the circles come out identical.
Pressing and assembly in list order
Press T-shirts with protective paper inside so the design does not transfer to the back. If the platen edge leaves a mark on polyester, see how to sublimate without a press frame mark. Assemble each badge as its blank's card describes: the metal shell, the insert and the PET film on one side of the machine, the back on the other. The name must sit level with the pin: how to align the text on a badge.
Check against the list
Check each finished item against the sheet and tick it off. Reprint a reject straight away on a spare blank.
Pack per child
Put all of one child's items in one bag with the child's name on a sticker. Add a warning to the bag with the badge: “Sharp pin. An adult pins it on.” Pack the bags into a box in list order.

Each child's set goes into its own bag with a sticker.
What to prepare by the end of the week
Before the first class lists
Frequently asked questions
What should a class give the teacher?
One item with a shared photo: an acrylic frame with a backlight or a mug in a box. Ask for the class photo together with the name list, so you are not waiting for it in the last week.
How do I make a mug for a teacher of a particular subject?
Keep one base design and change the subject picture: a globe, musical notes, formulas. Then each new mug means swapping one layer, not a new layout.
What badge size suits a first-grader?
For a name, 44 mm with a 54 mm insert works well. A long name with a picture fits more freely on 58 mm, with a 70 mm insert. It needs a 58 mm die of the same class as the blank. An adult pins the badge on a child's clothes.
How long does a class order take?
Three working days from the complete list to dispatch: layout and approval, printing and pressing, checking and packing. The press and the badge machine take 83–126 minutes of that for 30 children.
What should I do with an order that arrives after 21 August?
Take it only if you have free press hours and the Nova Poshta estimated date is no later than 28 August. Otherwise offer pick-up or a single gift instead of a class run.
