If a sublimation image is too dark after heat pressing, do not brighten the artwork by guesswork. First check the nozzles, profile compatibility and colour-management path. Then compare the result with a previously accepted item under known printing and transfer conditions. Selecting an ICC profile alone does not establish that the entire combination is set up correctly.
Keep one control file unchanged
Use a fixed file with colour patches and neutral tones. Record its colour space and embedded profile. While diagnosing the problem, do not change brightness, saturation or tone curves: that would make the input images different.
Judge colour on the finished item. A screen or an unpressed paper print cannot replace that comparison. Ideally, use a previously accepted sample of the same blank and compare both items under the same lighting.
Check printing and the colour profile
Print a nozzle check. If lines are missing, first follow the manufacturer's permitted maintenance sequence and repeat the check.
An ICC profile describes colour reproduction under particular conditions. Check the printer model, ink, paper, print side and settings for which the supplier specifies that profile. A similar filename or a profile for different paper does not establish compatibility.
Identify where colour is managed: in the printing application or in the driver. Do not enable two independent corrections at once. The exact procedure depends on the application, printer and profile instructions; there is no universal menu sequence. See the article on ICC profiles, calibration, and basic colour checks for the underlying concepts.
Compare the control item without jumping to a diagnosis
Print the control file and transfer it to a known blank using its current instructions. Record the materials, print settings and actual pressing conditions that you can verify using the approved procedure.
- The control item is also dark. The cause has not yet been isolated. Printing, the profile, the blank or transfer conditions may be involved. Return to the recorded conditions and check them one at a time; do not identify the printer as the sole cause.
- The control item matches the accepted sample but another blank is darker. Compare the material, coating and transfer settings. One successful control does not guarantee press stability at every position or over repeated cycles.
Without a previously accepted sample and a known working process, a reference has not yet been established. Do not conceal that uncertainty by editing the artwork; ask the supplier to confirm a compatible combination and how to check it.
Check the blank and press separately
Use the instructions for each blank's own material and coating. Do not transfer a mug setting to polyester, or from one coating batch to another, without confirming compatibility.
If the result changes with platen position or repeated cycles, check temperature, contact time, pressure, loading and protective paper only by methods permitted in the instructions. Do not change temperature, time and pressure together. After one permitted change, make a new control and record the result.
When to resume production
Resume when the control item reproduces the agreed result under the conditions intended for the order. If conditions are unknown or results vary, first clarify the profile or materials, or have the press checked. Do not promise an exact match to an unverified screen.
For a useful enquiry, prepare the printer model, exact ink and paper names, profile file, settings, blank name and batch, and photos of the control items. View MyPrint sublimation inks and verify the exact combination.
