25.07.2025

Saddle-stitched booklets: why inner pages lose their outer margin

Saddle-stitched booklets: why inner pages lose their outer margin

The sheets started the same size, yet the middle of the folded booklet protrudes beyond the cover. Nested folds wrap around the accumulated paper thickness, producing page creep. Trimming this edge to one line removes more paper from the inner sheets. With the same starting margin, their text ends up closer to the cut edge.

To retain space around important content, account for protrusion in imposition and check a finished folded sample when preparing the job.

Where sheet length goes at the spine

In a saddle-stitched booklet, folded sheets sit inside one another and staples pass through the fold. The outer sheet wraps around the inner stack along a longer curve, using some of its length to go around that thickness. Closer to the middle, this curve is shorter, so the free edges extend farther. The fore-edge is the edge opposite the spine, where you turn the pages.

Spine
Free edges →
Outer sheet
Intermediate sheet
Inner sheet

Schematic view from the top end before trimming. Each coloured line is one continuous folded sheet, with its two free ends on the right. Thickness and spacing are exaggerated. Only three sheets are drawn to explain the mechanism, rather than all ten in the example below.

One trim line, two different margins

Take a hypothetical photo portfolio made from 10 folded, nested sheets: 40 pages in total, including the cover. The measured protrusion of the innermost sheet is given as 1.2 mm. This is an input to the example, not a value calculated from the page count or g/m².

Before trimming, every page has 8 mm between the edge of its content and its own raw fore-edge. The shared trim line is chosen to remove 1 mm from the outer sheet. The inner sheet protrudes another 1.2 mm, so 2.2 mm must be removed from it.

Enlarged detail near the fore-edge of a right-hand page. Every row has the spine to the left and the edge to the right, using one horizontal scale and the same trim line. The dark mark identifies the edge of the same content.

Before trimming · content in its original position

The dashed line is the shared trim line; the pink strips on the right will be cut off.

Outer · 1 mm strip to be removed
8 mm to its own raw edge
Inner · 2.2 mm strip to be removed
8 mm to its own raw edge

The inner raw edge extends another 1.2 mm

After trimming · content has stayed in place
Outer · 1 mm removed
7 mm
Inner · 2.2 mm removed
5.8 mm

The coloured paper ends at the shared line. Outlines on the right show the removed strips in their former positions.

Outer page: 8 − 1 = 7 mm
Inner page: 8 − 2.2 = 5.8 mm

The difference in margins is the same 1.2 mm. This is the geometry of the hypothetical example; 7 mm is not a universal safe margin.

Restoring the outer margin uses inner space

In this example, moving the inner page content 1.2 mm towards the spine restores the outer margin to 7 mm. The inner margin beside the fold becomes smaller by the same 1.2 mm. Text and photographs retain their scale during this shift; scaling is a separate operation.

The same inner sheet · compensation applied before printing
Content: 1.2 mm towards spine ← · after trimming
7 mm

5.8 + 1.2 = 7 mm outside

The trim line and finished paper edge stay in the same place. Compared with the row above, only the content has moved; the illustrated result comes from printing with compensation and then trimming.

The directions mirror each other across a spread
Spine
Left page
Towards spine →
Right page
← Towards spine

Direction schematic: content moves right on a left-hand page and left on a right-hand page. Check the space beside the fold on both pages.

Compensation is applied during imposition, which places pages on the printing sheet. Intermediate sheets need progressively adjusted compensation according to their position in the nested set. Agree who will apply it and where, so all pages do not receive an identical shift and compensation is not applied twice.

A photograph crossing a spread also needs attention: moving its parts changes how they meet at the fold. Check image details in the centre along with the inner margins, as well as the distance from a caption to the outer cut edge.

Bleed preserves the background, but cannot restore text clearance

Bleed is the continuation of a background image beyond the trim line. Extra bleed supplies background for trimming, but does not move a caption, page number or important photographic detail away from the cut edge. Content placement must provide that clearance.

What to give the person preparing imposition

For an inkjet photo portfolio, choose a double-sided option from the inkjet photo paper category. Separately check that the selected material suits your printing and folding process: a double-sided coating alone does not establish either property.

  1. A folded dummy made from the actual materials. Use the same body and cover paper, sheet count, size, folding method and fastening as the planned product. A dummy made only from arbitrary office paper may show the page order correctly, but not the protrusion of your booklet.
  2. Protrusion and important content relative to the cut. Measure the actual protrusion of the inner sheets relative to the outer one. Mark the agreed trim line and the positions of the nearest captions, page numbers and important details on the dummy. Give the measurement and dummy to the person preparing imposition; agree the compensation and space beside the spine.
  3. A printed, folded and trimmed proof. After agreeing the imposition, examine outer, intermediate and central pages. Is the required clearance from the cut still there? Is the inner margin sufficient? Are photographic details across the fold preserved? The finished copy shows the result for this construction.

Use this check when qualifying a new product or changing its paper, cover or construction. For an unchanged, already qualified process, follow the agreed control procedure; a new order alone does not require restarting the full trial.

When the stepped edge is intentional

An untrimmed fore-edge can be an agreed finish. In that case, the protrusion remains part of the booklet's appearance and should not be trimmed off automatically. Assess text placement and page turning in that finished form.

A skewed cut, front-to-back misregistration or an irregular slant needs a separate investigation. Booklet thickness alone does not prove creep is the cause. Compare the folded dummy's edges before cutting, the print position and the actual cut line before changing compensation.