07.10.2026

Polyester or Two-Layer: Which T-Shirt to Use for Sublimation

Polyester or Two-Layer: Which T-Shirt to Use for Sublimation

Sublimation dye enters polyester but does not hold on cotton, so for sublimation you take white T-shirts whose print side is synthetic. Take the 170 g/m² polyester T-shirt for an event, a run, a promo or an amateur team, and the 200 g/m² two-layer one for staff uniforms, merch for sale and children's orders. Print cotton and dark T-shirts and hoodies with a DTF transfer (a design printed on film with a white underbase) or with heat-transfer film.

What sublimation needs from a T-shirt

First, the composition. On a cotton blend the print is paler, and the less polyester the fabric has, the paler it gets. Blank suppliers recommend at least 60–65 % polyester, and pure polyester gives the brightest colour.

Second, the fabric colour. Sublimation ink is transparent and does not print white. On a white T-shirt the colours come out true, on a light one they mix with its colour, and the white areas of the design take the colour of the fabric. On black the design is barely visible.

Bright sublimation print on a white polyester T-shirt, close-up of the fabric

Yes: on polyester the print is bright and sharp.

The same print on a white cotton-blend T-shirt, with visibly paler colours

No: the same design on a T-shirt with cotton is already pale after pressing.

Two white MyPrint T-shirts for sublimation

Among the sublimation T-shirts at MyPrint, one of two will suit most orders. Both T-shirts are white, in men's and women's cuts, sizes XS to XXXL. Prices as of October 2026.

White polyester T-shirt for sublimation

Sublimation T-shirt, polyester 170 g/m²

Polyester; lighter and cheaper than the two-layer one · 199 UAH

White two-layer T-shirt for sublimation

Sublimation T-shirt, two-layer 200 g/m²

Synthetic outside for the print, cotton inside; interlock knit, shoulders reinforced with a silicone insert · 264 UAH

Two-layer children's T-shirts and long-sleeve T-shirts are also available.

Which one to take for the order

Choose by who will wear the T-shirt and how often. Prices as of October 2026.

Event, run, promo

Polyester 170 g/m²

Cheaper: 50 T-shirts cost 3,250 UAH less than two-layer ones (199 UAH vs 264 UAH apiece).

Amateur team

Polyester 170 g/m²

Light and cheaper. Print each player's name and number on the same sheet as the design.

Staff uniforms, merch for sale

Two-layer 200 g/m²

Cotton against the skin, the fabric keeps its shape and the shoulders do not stretch — a T-shirt for every day. For autumn there is a two-layer longsleeve at 277 UAH.

School, camp, kids' club

Two-layer kids' 200 g/m²

For heights of 110–164 cm. 212 UAH.

Folded white T-shirt and longsleeve with the same bright sublimation design

A T-shirt and a longsleeve with one design: on a white base the colours match on both items.

When you need something other than sublimation

MyPrint's cotton T-shirts are 93 % cotton and 7 % elastane, in white, black and olive. Hoodies and sweatshirts are cotton with polyester, in olive, grey and black. Apply the design to them with a DTF transfer: it has a white underbase and holds on cotton and dark fabric. How to get bright colour on dark fabric is covered in our article on DTF on dark fabrics. Simple lettering and numbers can be cut from heat-transfer film.

A dark polyester team kit also goes to DTF. On coloured polyester, lower the transfer temperature, otherwise the fabric dye will stain the white layer of the print: what to change so the white does not turn pink.

A client brings their own T-shirts — check the composition on the label. From 60–65 % polyester, sublimation will work, but paler than on pure polyester; on a 50/50 blend the difference shows right after pressing. Press one T-shirt and show it to the client before the run. If there is less polyester, use DTF.

The press and the first T-shirt

T-shirt heat presses are chosen by design size: up to A4, a 38 × 38 cm platen is enough, while an A3 design on the front of the T-shirt needs a platen of 40 × 50 cm or larger. Prices as of October 2026.

Design up to A4

HP380A NEW, 38 × 38 cm

Clamshell press, timer up to 999 s. 12,850 UAH.

A3 design on the front

HP450D, 40 × 50 cm

The lower platen slides out, so you lay out the T-shirt away from the hot heater. 20,490 UAH.

MyPrint's starting settings for a polyester T-shirt:

Temperature, °C

190–200

the hotter, the shorter

Time, s

45–60

by the press timer

Pressure

medium

the handle closes with moderate effort

Inside the T-shirt

pillow

wrapped in clean protective paper

For every new batch or a different fabric, including the two-layer one, press one test T-shirt first.

1

Print the design mirrored

On sublimation paper; let the sheet dry.

Take a heat pillow larger than the design but smaller than the sheet and the platen. Set medium pressure with the pillow inside the T-shirt.

2

Insert the pillow and pre-press the T-shirt

The pillow wrapped in clean protective paper goes inside, under the print area: this keeps the ink from passing to the back. Cover the T-shirt with protective paper, pre-press for 3–5 sto drive out moisture and creases, and remove the top paper.

3

Lay the sheet design side down

Centre it on the pillow so the sheet extends beyond it on all sides. Put the heat tape outside the pillow's edge. Cover everything with clean protective paper larger than the platen.

4

Press and cool

After the timer signal, remove the sheet and let the T-shirt cool laid flat.

White T-shirt on the lower platen of an open heat press, sublimation sheet fixed with heat tape

The sheet lies design side down, with heat tape along its edges.

How to choose the pillow and pressure so that no frame is left around the design is covered in the article on the press frame on a polyester T-shirt.

Frequently asked questions

What is a sandwich T-shirt?

That is what sellers call a two-layer T-shirt: synthetic outside for the print, cotton inside. MyPrint's adult two-layer 200 g/m² T-shirt has this construction.

Is there an oversize T-shirt for sublimation?

Yes, the white unisex oversize “modal” 200 g/m² marked “for sublimation”, 327 UAH as of October 2026. Ask a MyPrint manager for the fabric composition, and press one test piece before the run.

How do I wash a T-shirt with a sublimation print?

In cool water, inside out, without bleach; dry without high heat and do not iron over the design. If the T-shirt's label says otherwise, follow the label.