Matte photo paper reduces the mirror-like glare from the print surface itself. But a frame's front glass reflects light separately: replacing glossy paper with matte paper will not remove a window's reflection from that glass. Gloss can also be a good choice if you like its appearance and the light lets you see the photograph comfortably. Whatever the paper finish, an ordinarily framed print needs to be kept separate from the glass with a window mat or suitable spacers.
Two decisions for one photograph
Light can return to your eye before reaching the photograph
Some light from a lamp or window reflects off the glass without reaching the paper. Another portion passes through the glass, reaches the print and returns to the viewer. The finished frame therefore combines the properties of two different surfaces.
Reflection at the front glass
The paper surface does not change this front reflection.
Reflection at the paper behind it
The character of this reflection depends on the paper surface.
Side view: viewer and light source above the layers, paper behind the glass. Arrows indicate directions schematically; refraction and repeated reflections are not detailed. This is not a measurement of glare from any particular glass or paper.
On a glossy surface, a bright source can produce a distinct mirror-like highlight. A matte surface scatters light more, so that highlight is usually less pronounced. Matte paper still reflects light; otherwise we would not see the image. The word matte does not mean a print will be equally comfortable to view under every lighting condition.
Choose for the place where people will view the photo
Think about both the subject and where people will stand or sit to look at the frame. A large bright window opposite it and a lamp you can redirect create different conditions. These are two choice scenarios, not a measured print-quality comparison.
A room with broad, bright light
A window or bright wall is reflected in the frame; people pass the photograph and see it from different sides.
Matte paper is a useful first candidate if you want the print itself to have a less mirror-like surface. A large reflection on the front glass may still remain.
Check the frame from several normal viewing positions. Try another wall or change the frame's direction relative to the window. For the photograph's preservation, also avoid a position in direct sunlight.
For a trial inkjet print with dye inks, consider My Print matte A4 photo paper, 180 g/m² (7708).
A spot with controlled lighting
There is a main viewing position, and the lamp or frame can be turned so that the light source's reflection does not obscure the subject.
Glossy paper is a valid option if you like its shiny surface. Gloss is not inherently a mistake and does not in itself make a photograph worse.
Assess the print in the finished frame with the lights on. Move a little to one side: a good view from one position does not describe every place from which people will see the photo.
For the same type of printing, there is My Print glossy A4 photo paper, 180 g/m² (7697).
Both listings describe one-sided A4 photo paper, 180 g/m², for inkjet printing with dye inks. This does not establish compatibility with every printer using pigment inks: check your model's media and ink requirements. The photo paper in this example is the final print, not paper for sublimation transfer; the category name in the product's web address does not change its intended use.
180 g/m² is the mass of a square metre of paper, not its thickness. Matching format and mass do not mean these two papers have identical coatings or thicknesses. Nor can those specifications predict differences in colour, sharpness or print longevity.
A window mat leaves space between glass and image
A window mat is a board surround with a cut-out opening through which you see the photograph. Its edges sit around the visible image and hold the glass in front of the print. Mat names this separate framing component; matte describes a paper surface. Adding a mat does not turn photo paper matte.
Frame cross-section through the mat opening
The pale supports at the sides are two edges of one window mat in section. Its open window is between them.
Diagram not to scale. The glass rests on the mat at the edges, leaving a gap above the visible image. The outer frame and fittings are omitted for clarity.
If you do not want a broad board border, suitable spacers along the frame's edges can maintain the gap. Choose a construction that keeps the assembled print away from the glass, including at the centre. There is no universal gap in millimetres for every frame and print.
Without separation, a photograph can stick to the glass. A matte finish does not remove the need for separation, and a window mat does not remove reflections on the glass. Choose acid- and lignin-free mat board for contact with the photograph. The gap alone is no guarantee of archival longevity for the complete framing assembly.
This advice concerns ordinary framing of a separate paper print. Professional face-mounting, which bonds the image side to a transparent panel, uses a different system of materials and mounting. Pressing a photograph against glass in a household frame does not make it equivalent.
Example: a lamp obscures an evening landscape
Imagine two prints of the same landscape at the same size, one matte and one glossy. This is a teaching example, not a MyPrint test. Each paper has been printed with suitable settings, and the prints have been allowed to dry according to the paper and ink recommendations before viewing.
First, the print without glass
View the two samples in turn in the same position under the same lamp. Keep the light and viewing position unchanged. This shows whether glare is already distracting on the paper surface.
Then, the same photo behind glass
Place the samples in turn in the same frame with the same glass and a gap. Compare with the previous view without glass, keeping the print's position relative to the lamp and viewer unchanged. Now assess what the front glass has added.
Moving your head alone does not identify the source: both glass reflections and paper sheen depend on angle. What matters here is comparing with and without the added glass while keeping conditions unchanged. If both surfaces are distracting, you will need to address both.
Make the final choice with the complete framing
Show the frame where it will stand or hang, in daylight and with the room lights on. Check whether important image details are visible from normal positions, whether you like the surface, and whether the photo stays clear of the glass. Agree on this actual appearance, rather than just the word matte or glossy on the pack.
Once you have chosen the display position and framing, explore other sizes and surfaces in the MyPrint inkjet photo-paper category. Check the printable side and your chosen paper's compatibility with your printer. Choose the glass, window mat and spacers separately to suit the frame.
