19.11.2026

MyPrint paper cutters in one table: stack, cut length and clamp

MyPrint paper cutters in one table: stack, cut length and clamp

Stacks of A4 and packs of business cards are cut on a guillotine: the GC Base 198 A4, 858 A4 and 858 A3 manual models cut through up to 40 mm at a time, about 400 sheets of 80 g/m² office paper, and have a screw clamp. According to their cards, the PC ProCut 450 and PowerCut 480 electric models cut 400 and 800 sheets. Sabre cutters take up to 12 sheets and rotary cutters up to 10: they are for photos, posters and single sheets. To trim a sheet on all four sides, compare its long edge with the cut length.

18 MyPrint cutters in one table

The figures come from the cards in the Paper cutters category; prices are as of October 2026. Italics mark a use that follows from the format and cut length. For the GC Base 198 A4 and 858, 40 mm ≈ 400 sheets of 80 g/m² office paper; work out the sheet count for your own paper from its thickness. For the PC and RC models, the cut length column gives the working size from the card. SRA3 is a digital-print sheet of 320 × 450 mm.

ModelCut lengthStack per cutClampPrice, UAHBest for
GC Base 198 A4manual guillotine300 mmup to 40 mm ≈ 400 sheetsscrew, handwheel6,550business cards, flyers, photo paper, laminated items
GC Base 198 A3manual guillotine—400 sheets—8,980A3 stacks
858 A4manual guillotine310 mm40 mm ≈ 400 sheetsscrew10,385card, photo paper, booklets
858 A3manual guillotine430 mm40 mm ≈ 400 sheetsscrew14,350card, photo paper, booklets
PC Compact 320electric32 cm——40,940A4 stacks
PC ProCut 450electric45 cm400 sheets—65,780A3 stacks
PC PowerCut 480electric48 cm800 sheets—97,560A3 and SRA3 stacks
829-4 A4sabre cutter—table 300 × 250 mm12 sheetsmanual805photos, business cards
829-2 A3sabre cutter460 mm12 sheetsmanual1,559posters, A3 photos, calendars, A3+
SC Pro 01 A4 / A3sabre cutters—12 sheets—1,380 / 1,950single A4 / A3 sheets
A3 trimmerrotary trimmer, plastic———570single A3 sheets
800-24rotary cutter610 mm10 sheetsautomatic clear bar7,595A2, posters, photos, menus
1200-36rotary cutter920 mm10 sheetsautomatic clear bar14,415A1, posters, drawings
1200-36rotary cutter with stand and basket920 mm1 mm ≈ 10 sheetsautomatic clear bar26,025photo paper, drawings, drawing paper, thin film
RC L48 / RC L63rotary cutters122 / 160 cm10 sheets—13,840 / 18,670wide format
RC LS60rotary cutter on a stand152 cm——40,560wide format

Notes on the rows

GC Base 198 and 858 manual guillotines

GC Base 198 A4 at 6,550 UAH is the cheapest guillotine in the category. It has a screw clamp with a side handwheel, a magnetic stop, format marks on the table and a blade lock. Its 300 mm cut is only 3 mm longer than the long edge of A4. It weighs 14.5 kg and takes up 520 × 400 mm, so it needs a sturdy table of its own. Choose a spare knife for it with a MyPrint manager before you buy.

For SRA3 work on the GC Base 198 A3, confirm the cut length, stack height and clamp type with a MyPrint manager.

858 A4 and 858 A3 have a screw clamp, a millimetre scale on the table, a blade lock and a safety guard; the 858 A3 weighs 23–25 kg. The category sells a spare knife and cutting stick for both. If you cut only A4 and smaller, the 858 A4 is enough; for A3 take the 858 A3.

A stack of white paper on a guillotine table held by a steel clamp bar at the cut line behind a clear guard, with the knife raised above the bar

The clamp holds the stack right at the cut line. On a manual guillotine it is tightened before the knife comes down.

My Print GC Base 198 A3 manual guillotine paper cutter

My Print GC Base 198 A3 manual guillotine paper cutter

A3 format · 400 sheets per cut · 8,980 UAH

My Print 858 A3 guillotine paper cutter

My Print 858 A3 guillotine paper cutter

430 mm cut · 40 mm stack ≈ 400 sheets · screw clamp · 23–25 kg · 14,350 UAH

PC Compact 320, ProCut 450 and PowerCut 480 electric cutters

The PC Compact 320, ProCut 450 and PowerCut 480 have a working size of 32, 45 and 48 cm; the ProCut 450 cuts 400 sheets at a time and the PowerCut 480 cuts 800. In the card photos the Compact 320 is a desktop model with a handwheel at the front and cut buttons on both sides. The ProCut 450 and PowerCut 480 stand on cabinets: the first has a control panel with a display and a red emergency button, the second a touch screen.

Of the three PC models, only the PowerCut 480 takes the long edge of SRA3 (450 mm) with room to spare: the ProCut 450 size is exactly 450 mm. There are knives for all three and a cutting stick for the Compact 320.

Before ordering a PC model, check with a MyPrint manager the stack height for your paper, the clamp type and the range of distances from the knife to the back gauge. For SRA3, confirm that a 320 × 450 mm sheet fits.

My Print PC ProCut 450 electric paper cutter

My Print PC ProCut 450 electric paper cutter

45 cm size · 400 sheets · control panel with a digital display · knife 5,250 UAH · 65,780 UAH

Sabre cutters: up to 12 sheets

829-4 A4 at 805 UAH is the cheapest sabre cutter: a 300 × 250 mm table with A4–B7 marks and a knife lock, and its card names photos and business cards among its jobs. 829-2 A3 has a 460 mm cut and a 460 × 380 mm table, so a whole SRA3 sheet fits under the knife; the knife locks in the down position.

SC Pro 01 A4 and A3 cut up to 12 sheets; the photos show a clear guard along the knife and a side stop on a rail.

A sabre cutter is for a few sheets at a time: photos, postcards, sheets of business cards. Cut packs of business cards on a guillotine, where the clamp holds the stack along the whole knife.

My Print SC Pro 01 A3 sabre paper cutter

My Print SC Pro 01 A3 sabre paper cutter

A3 format · 12 sheets · 1,950 UAH

Rotary cutters and the trimmer

The A3 trimmer at 570 UAH is a plastic rotary cutter for single sheets.

800-24 (61 cm) and 1200-36 (92 cm) cut up to 10 sheets. A clear bar clamps the sheet along the cut line by itself, and the knife is enclosed in the cutting head. The 1200-36 also comes on a stand with an offcut basket.

RC L48 (122 cm), RC L63 (160 cm) and RC LS60 on a stand (152 cm) are for wide-format prints. The RC L48 and L63 cut up to 10 sheets. The disc knife for the L48 and L63 costs 250 UAH, the carriage for the LS60 10,890 UAH. For a 61 or 92 cm cut length, there are the 800-24 and 1200-36.

If the image and photo paper have different aspect ratios, choose between printing with borders and cropping. How to match them is explained in “10×15 photos: keep the whole frame or crop on purpose”.

How to check your sheet and your stack

The cut length is the maximum sheet width along the knife. If the long edge of the sheet is shorter than the cut length, you can trim each of its sides. If only the short edge fits under the knife, first cut the sheet across, then trim the resulting strips. This way the 858 A3, with its 430 mm cut, can cut SRA3 into business cards. If even the short edge is longer, the sheet does not fit under the knife: SRA3 cannot be cut on the 858 A4 (310 mm).

A4 · 210 × 297 mm

297 mm

all four sides: every cutter with a cut length of 300 mm or more

A3 · 297 × 420 mm

420 mm

all four sides: 858 A3, 829-2 A3, PC 450 and 480, rotary cutters; across first: GC Base 198 A4, 858 A4, PC 320

SRA3 · 320 × 450 mm

450 mm

all four sides: 829-2 A3 one sheet at a time, PC 480 in stacks, rotary cutters; across first: 858 A3; PC 450: no margin

The large figure is the long edge of the sheet. “All four sides”: cutters whose cut length is longer than that edge; “across first”: cutters that take the sheet only by its short edge.

Then the stack. The cards count it in 80 g/m² office paper: 40 mm ≈ 400 sheets, that is 0.1 mm per sheet. Such a sheet is usually 0.10–0.11 mm thick, so 40 mm holds 360–400 sheets. Business-card board is thicker, so less of it fits. Measure 50 sheets of your own paper and work it out like this:

Example: 300 g/m² card in a 40 mm stack

Measured: 50 sheets pressed flat by hand15 mm
One sheet: 15 ÷ 500.3 mm
Office paper 80 g/m²: 40 ÷ 0.1400 sheets
Card: 40 ÷ 0.3133 sheets

40 mm is the maximum stack height; check the cut accuracy on your own paper. First cut a low stack and compare the top and bottom business cards by laying one on the other. If they do not match, look for the cause in “The cutter cuts the stack at a slant: top sheets shorter than bottom ones”.

Business cards: gauge and clamp

A sheet with ten business cards, stacks of cut cards and trimmed margin strips on the cutter table

One sheet gives ten identical business cards; the gutters and edges are trimmed with separate cuts.

90 × 50 mm business cards are cut with several cuts against the gauge, so you need a gauge that locks and a scale. For the finished size, the knife-to-gauge distance is set to 90 or 50 mm. The 858 has a millimetre scale on the table, the GC Base 198 A4 a magnetic stop and format marks, the 829-4 A4–B7 marks. Where to set the gauge for a sheet of cards with gaps between them is set out in “Crop marks cut off: how to finish business cards against the back gauge”.

On dark and laminated business cards the clamp bar can leave a mark. How to protect the stack without loosening the clamp is covered in “The cutter clamp leaves marks on business cards: how to protect the stack”.

Knife and cutting stick: for your model

The smooth, even cut face of a freshly trimmed stack of paper in side light

The cut face from a sound knife: smooth, with no tracks or torn fibres from top to bottom of the stack.

The cutting stick is a PVC strip in the table that the knife enters at the end of its stroke, so the bottom sheet is cut through and the blade does not hit metal. Knives and sticks are chosen by model, not by format. Spare parts in the category: 858 A4 — knife 1,350 UAH and cutting stick 117 UAH; 858 A3 — knife 1,680 UAH and cutting stick 138 UAH; PC Compact 320 — knife 3,375 UAH and cutting stick 220 UAH; PC ProCut 450 — knife 5,250 UAH; PC PowerCut 480 — knife 6,480 UAH; 829-4 — knife 250 UAH; 829-2 — knife 420 UAH; RC L48 and L63 — disc knife 250 UAH; RC LS60 — carriage 10,890 UAH. A MyPrint manager will find spare parts for other models.

Knife for the My Print 858 A3 guillotine

Knife for the My Print 858 A3 guillotine

Steel · for the 858 A3 cutter · 1,680 UAH; its cutting stick 138 UAH

Tracks on the cut face of the stack mean it is time to check the knife, as described in “The cutter leaves streaks on the stack edge: when to change the knife”. If the bottom sheet is not cut through, start by checking the cutting stick.

Frequently asked questions

Is there a cutter for 500 sheets at once?

Among MyPrint manual guillotines the largest stack is 40 mm, about 400 sheets of 80 g/m². Only the PC PowerCut 480 electric model takes more according to its card: 800 sheets. On a manual guillotine, cut 500 sheets as two stacks.

Sabre or rotary: which to choose?

Both are for single sheets: MyPrint sabre cutters cut up to 12, rotary ones up to 10. The 800-24 and 1200-36 rotary cutters clamp the sheet with a clear bar, their knife is enclosed and the cut length starts at 61 cm, which suits photos and posters. The 829-2 A3 sabre cutter at 1,559 UAH trims A3 and SRA3 on all four sides. Cut packs of business cards on a guillotine.

What should I cut a few business cards with?

A few sheets: on the 829-4 A4 sabre cutter at 805 UAH, whose card names business-card making. Cut one sheet at a time, lining up the crop marks with the cut line each time. When you have hundreds of cards, you need a guillotine with a gauge: the GC Base 198 A4 or an 858.

What should I cut photo paper and laminated cards with?

In stacks, on the GC Base 198 A4 and 858: their cards list photo paper among the materials, and the GC Base 198 A4 card also lists laminated items. Cut single photos on a rotary cutter or the trimmer, large prints on rotary cutters from 61 cm. Whether to cut cards before or after laminating is covered in “Laminated cards: cut before or after laminating?”.

Will a knife or cutting stick from another cutter fit?

A part will fit if your cutter model is included in its compatibility list. Before ordering, check your cutter's model against the name on the spare knife or stick card. Go by condition: tracks on the cut face call for checking the knife; an uncut bottom sheet calls for checking the cutting stick and cutting depth.