12.05.2026

How large can you print a photo? Calculate from its pixels

How large can you print a photo? Calculate from its pixels

Check a photo's print size using its pixel dimensions and the physical dimensions of the image itself.

For example, an unchanged 2400 × 1600 pixels printed at 30 × 20 cm gives 203.2 PPI. Compare that figure with the requirement for the particular job: you can then agree on this size, choose a smaller one or request a more detailed original. A “300 dpi” label in the file properties cannot make that decision for you.

Effective PPI is the number of retained image pixels per inch of the printed image. PPI stands for pixels per inch. Divide the pixel width by the printed image width in inches; check the height in the same way. Printer DPI describes the density of printed dots and does not replace the file's PPI in this calculation.

Use the area occupied by the photo, rather than the outside edges of the paper. If a 24 × 16 cm image sits on a larger sheet with white margins, the dimensions for the calculation remain 24 × 16 cm.

One file, two printed image sizes

Take this hypothetical example: one 2400 × 1600 pixel file, with no cropping or resampling. Both prints keep the same 3:2 proportions, and the specified image size is not changed again during printing.

Unchanged source: 2400 × 1600 px · 3:2 proportions

A · image size 24 × 16 cm

254 PPI

B · image size 30 × 20 cm

203.2 PPI

The blue outlines represent the whole image. Each grid is the same schematic magnified fragment of 6 × 4 cells, not all 2400 × 1600 pixels of the photo. The fragment has the same magnification relative to each print. Its cells are larger in the larger image; their count and colours stay unchanged. This is a diagram, not a test of actual sharpness.

The width and height increase by a factor of 1.25, so PPI decreases by the same factor: 254 ÷ 1.25 = 203.2. The file still contains the same pixels, now spread over a larger physical area. This describes scale; it does not establish the sharpness of two real prints.

Calculate with units, without guessing the conversion

One inch is exactly 25.4 mm. The width in inches therefore equals the width in millimetres divided by 25.4:

PPI = pixels ÷ (size in mm ÷ 25.4)

So PPI = pixels × 25.4 ÷ size in mm.

Image width: 30 cm = 300 mm

2400 px×(25.4 mm / inch)÷300 mm=203.2 px / inch

Millimetres cancel out, leaving pixels per inch: PPI.

For the height of the same print: 1600 × 25.4 ÷ 200 = 203.2 PPI. For the smaller 24 × 16 cm image, both axes give 254 PPI: 2400 × 25.4 ÷ 240 = 254 and 1600 × 25.4 ÷ 160 = 254.

If an agreed crop has removed part of the photo, first record the pixel dimensions of the remaining image and recalculate for its final printed size. Check the print preview for any further change to the image scale by the application or printer driver.

What changing “300” in the editor actually does

Without resampling

The pixel dimensions remain 2400 × 1600. Changing the recorded resolution may change the physical size suggested by the editor; changing the physical size changes the displayed PPI. If those same pixels are actually printed at 30 × 20 cm, the effective value is still 203.2 PPI, whatever the metadata tag says.

With resampling

The editor adds or removes pixels. When enlarging an image, interpolation calculates new values from the existing ones. The pixel count grows, but that copy does not become a newly captured, more detailed original. Adding pixels alone does not establish that a photo is suitable for printing.

To check the print size, open a copy of the original, turn resampling off and change the width while keeping the proportions linked. Confirm that the pixel dimensions have not changed. Keep the original separately so that you can return to it after cropping or other processing.

Which size should you agree on?

Clarify the requirement for this particular photo print, including the reproduction process, viewing conditions and viewing distance. 203.2 PPI does not mean automatic rejection, and 300 PPI is not a universal quality threshold. There are then three practical options.

Keep 30 × 20 cm

If 203.2 PPI meets the agreed job requirement, the calculation alone does not force you to print this file smaller. Use a sample to finish assessing the appearance of important details when acceptance depends on them.

Print smaller to meet the specified PPI

The inverse formula is size in mm = pixels × 25.4 ÷ required PPI. In units, this is px × (mm/inch) ÷ (px/inch) = mm.

Only if a requirement of at least 300 PPI has been agreed for the job, the maximum 3:2 image from the unchanged 2400 × 1600 pixels measures 203.2 × 135.466… mm: 2400 × 25.4 ÷ 300 and 1600 × 25.4 ÷ 300.

That is approximately 20.32 × 13.55 cm. Let the editor calculate the exact height with the proportions linked; do not round both sides independently. This figure describes the largest size that meets this PPI requirement, but does not by itself establish image quality.

Find a genuinely more detailed original

If the job specifically requires 30 × 20 cm and at least 300 PPI, request a source file with more retained detail. For example, a different, genuinely more detailed 3600 × 2400 pixel original gives 304.8 PPI on both axes at this size: 3600 × 25.4 ÷ 300 and 2400 × 25.4 ÷ 200. A copy of the first file interpolated to 3600 × 2400 is not that original.

A sample shows what PPI cannot

PPI alone cannot assess focus, compression artefacts, noise or the printer's reproduction quality on the chosen medium. Even a file with enough pixels may contain indistinct details.

If the result is in doubt, print an important section at the scale of the final image, using the chosen paper and agreed settings. Do not enlarge that section to fill the test sheet. Judge faces, texture or another important detail from the intended viewing distance, then agree on the size or a replacement source.

Once the image size and margins are agreed, choose photo paper for inkjet printing: the sheet must accommodate the photo and margins, and your printer must support its size and type. Check the available printable area separately. Paper adds no pixels; the agreed image, margins and compatible sheet together determine the physical result.