07.01.2025

Why four A6 cards with bleed won’t fit on A4

Four A6 cards on A4: why bleed needs more room

Four A6 cards measuring 105 × 148 mm in a 2 × 2 grid occupy 210 × 296 mm: the full width and almost the full height of A4. The trimmed rectangles themselves fit. But there is no room for a separate extension of the artwork around each card for trimming — you need to change the finished size, the number per sheet or the paper size.

105 × 148 mm is the size after trimming

Bleed is the background or photograph extended beyond the intended cut line. It prevents a small shift in the cut from exposing a white sliver along the edge. Bleed is trimmed off; a white border inside the card, by contrast, remains part of its design.

Worked example: a finished card of 105 × 148 mm with a separate 3 mm bleed on every side. Each card’s rectangle, including bleed, must not overlap another. We first count only these rectangles, without crop marks. The 3 mm bleed is an assumption for this example; agree the required bleed for the actual trimming process.

One card before trimming

Including bleed: 111 × 154 mm

Trim size: 105 × 148 mm

3 mm beyond every edge

Width

105 + 2 × 3 = 111 mm

Height

148 + 2 × 3 = 154 mm

Allow 111 × 154 mm in the layout; the finished card remains A6.

Dashed line — finished edge and cut line
Pale band — bleed; thin outline — its outer edge
Blue outline — sheet edge

Where the layout extends beyond A4

Four A6 cards without bleed

Layout: 210 × 296 mm

The trim outlines use all 210 mm of A4’s width. Just 1 mm remains in total along its height.

Four A6 cards with separate bleeds

Layout: 222 × 308 mm

2 × 111 = 222 mm; 2 × 154 = 308 mm. For this grid, the sheet is 12 mm too narrow and 11 mm too short.

Both diagrams use the same scale. The top left corners of the A4 sheet, 210 × 297 mm, and the layout are aligned; the overshoot is visible to the right and below the blue outline.

Rotating the cards won’t help either

Four rectangles including bleed

4 × 111 × 154 = 68 376 mm²

A4 sheet area

210 × 297 = 62 370 mm²

68,376 mm² > 62,370 mm². Even the combined area of the four separate rectangles exceeds the sheet area. Rotation preserves area, so a different orientation cannot make this layout fit under the example’s conditions.

Decide what to keep

What you keepWhat you change
Exact A6 trim and independent edge-to-edge artworkPut fewer cards on A4 or use a larger sheet. Two options are calculated below.
Four on A4 and exact 105 × 148 mm trimAgree a design with a white border. Move the printed elements inward to place them within the printable area. This changes the edge design: a white border does not replace bleed.
Four on A4 and separate bleedsAgree a smaller finished size, then add the required bleed again. Simply scaling down the entire layout also reduces the bleed.

Two on A4 or four on A3

Two cards on A4

Sheet: 210 × 297 mm

Layout: 154 × 222 mm

Rotate both cards. Each occupies 154 × 111 mm including bleed; place one above the other: 111 + 111 = 222 mm.

Four cards on A3

Sheet: 297 × 420 mm

Layout: 222 × 308 mm

Keep the 2 × 2 grid. The same four rectangles of 111 × 154 mm now fit within the larger physical sheet.

The sheets use the same scale; trim and bleed follow the legend above. These are nominal dimensions without crop marks.

Fitting on the paper is only the first condition. Add the required crop marks and check that every printed part of the layout lies within your printer’s actual printable area for the chosen paper and mode. If it does not, change the placement, quantity or sheet: these dimensions do not guarantee a usable layout on every machine.

Once you have chosen a sheet size, select photo paper for inkjet printers for single-sided or double-sided printing, in a thickness your printer accepts. An A3 layout makes sense if the equipment can handle that sheet; the material choice does not change the bleed geometry.

Borderless mode cannot add area

In some drivers, borderless printing enlarges the image so its edges extend beyond the sheet and are not printed. This can crop part of the artwork and change its scale. It cannot make room for four separate rectangles of 111 × 154 mm on A4.

For exact A6 trim, check that output uses actual size without automatic fitting. In the final layout, verify three things: 105 × 148 mm at the cut line, the full agreed bleed around each card, and every printed element including marks within the printable area. If these conditions cannot all be met, revisit the size or quantity before printing the full run.