10.11.2026

Armed Forces Day gifts: what to print and when to stop taking orders

Armed Forces Day gifts: what to print and when to stop taking orders

Ahead of 6 December, offer soldiers a metal mug with a carabiner, a car thermo mug or a 56 mm badge, and veterans and families a ceramic mug with a dark green rim and handle in a box. This year the holiday falls on a Sunday, so accept a unit's batch of up to 50 mugs with delivery to a front-line town until 20 November, a company order for 20 thermo mugs with names until 25 November, and a single order to another city until 1 December, if the blank is already on the shelf.

6 December: two holidays on a Sunday

6 December is Armed Forces Day in Ukraine and, since 2023, St Nicholas Day too: the Orthodox Church of Ukraine and the Ukrainian Greek Catholic Church moved to the new calendar. So people look for gifts for soldiers both «for Armed Forces Day» and «for St Nicholas».

If a school or a company honours the defenders on Friday 4 December, the gifts must be there on Thursday. Children's St Nicholas gifts fall in the same week: stockings, ornament balls, puzzles — the article «What to print for New Year» covers them and their dates. So finish the batches for soldiers by 27 November and keep the press free for the last week.

Four gifts and whom to offer them to

Blanks for them are in MyPrint's sections «Sublimation mugs», «Thermo mugs, thermoses and thermo bottles for sublimation» and «Button badge blanks». Prices are from the cards as of October 2026.

A white metal mug with a child's drawing hangs by its black carabiner from a backpack strap

The carabiner is both the handle and the clip for a backpack strap.

For those serving: a carabiner mug

Print a child's drawing, a call sign or an emblem from the client's file. Start with 180 °C and 60 s, as a maker of similar steel mugs recommends, and check this setting on a test mug.

300 ml, UAH 179; 400 ml, UAH 199 · mug press · start: 180 °C, 60 s

A thermo mug with an olive pattern and a black lid in a car cup holder

The pattern covers only the straight upper part: the heater cannot press the taper below.

For drivers and duty shifts: a thermo mug

A car thermo mug with a lid and a side handle; take the lid off before pressing. Why it presses for less time than ceramic and which heater to use is in the article «How a thermo mug works».

450 ml, UAH 255 · thermos press or mug press · start: 180 °C, 80 s

A tray of round 56 mm badges with sunflowers, wheat ears and blue-and-yellow waves on a school desk

The front holds the print under film, the back is a metal shell with a pin.

For schools and fairs: 56 mm badges

Allow 1–2 hours to print, cut and assemble 50 badges. How much of the design shows on the front is in the article «Which circle to cut for a badge».

56 mm, UAH 5.45 · badge press with a 56 mm die · insert circle 66.5 mm

A white mug with a dark green rim and handle and a wheat print next to an open brown kraft box

The green rim and handle come with the blank; the print only complements them.

For veterans and families: a boxed mug

For home or headquarters, a 330 ml ceramic mug with a dark green rim and handle fits. It costs about a third of the metal mug's price. Buy the brown box separately in the «Mug packaging» section: UAH 6.50, or UAH 64.50 together with the mug.

330 ml, UAH 58 · mug press · 200 °C, 180 s

For a parcel to the front, choose a metal mug or a thermo mug: they are less fragile than ceramic.

What to get from the client on the day of the order

Five things before printing

✓Get the unit's emblem or chevron from its representative as a vector file or a clear scan.
✓Call signs and names as text, exactly as they are to be printed, and how many of each item.
✓The recipient's city and Nova Poshta branch, and the day the gifts must be there.
✓Prepayment: order the blanks the same day.
✓A written «yes» to the layout before printing.

The ZSU wordmark and the Armed Forces emblem are Ministry of Defence trademarks registered on 3 June 2026. Check the conditions for using them on souvenirs with the rights holder. Make samples with neutral designs for display.

Calendar from 10 November to 6 December

Nova Poshta's standard terms: within a city up to 1 day, between regional centres 1–2 days, to remote settlements up to 3 days. They are not a guarantee, so on the day of the order enter the recipient's town into the delivery-time calculator on the Nova Poshta website. Plan front-line towns as remote and check that the branch is working.

WhenWhat to doWhat to check
10–13.11Tue–FriMake one sample of each product with a neutral design. Send the photos and an offer with the order deadlines to units, volunteers, companies and schools.The setting on the first piece; the design stays clear of the carabiner and the handle.
16–20.11Mon–FriTake unit batches: 20 November is the last day for delivery to a front-line town, 17 November for 150 mugs. Order the blanks on the day of prepayment.Stock status and dispatch date on the blank's card; the delivery date in the Nova Poshta calculator.
23–27.11Mon–FriLayouts, printing and pressing of the batches; the 27th is a spare day and for packing.The first piece of every batch is a test piece.
25.11WednesdayLast day to accept a company order for 20 thermo mugs with names for an event in your city on Friday 4 December. Order the blanks the same day.Names in one file; the layout approved in writing.
30.11MondayShip the batches to front-line and remote towns: on the standard term they reach the branch by 3 December.Whether the recipient's branch is working.
1.12TuesdayLast day to accept a single order to another city — from a blank on the shelf; if it has to be ordered from MyPrint, by 26 November. Print the company's 20 thermo mugs with names.The blank is there; the layout approved the same day.
2.12WednesdayLast dispatch to remote settlements, so the parcel is at the branch on Saturday 5 December. A spare day for company orders.The delivery date in the Nova Poshta calculator.
3.12ThursdayLast dispatch between regional centres, so the parcel is at the branch by 5 December. Hand over the company orders or deliver them within the city.Who collects them and when.
4.12FridayLast dispatch within the city.Whether the recipient's branch is open on Saturday.
6.12SundayArmed Forces Day and St Nicholas Day.—

How to work out the last day to accept an order

Count backwards from the day the parcel must be at the branch: delivery, a spare day, printing, layout. The rate comes from MyPrint's guide for a single mug press: 30–50 ceramic mugs in an 8-hour day, printing and packing included. Metal mugs and thermo mugs press for less time, so for them this rate leaves a margin.

Example: 50 carabiner mugs and 50 badges for a unit in a front-line town, one mug press

Layout and emblem approval1–2 working days
Blanks from MyPrint, ordered with the prepaymentin transit during the layout
50 mugs at 30–50 a day8–14 h
50 badges: printing, cutting and assembly1–2 h allowed
All printing, 8 h a day2 working days
Spare day and packing1 working day
Layout, production and a spare day4–5 working days

Delivery comes on top: up to 3 days to a front-line town.

Accept the order on Friday 20 November: layout on the 23rd–24th, printing on the 25th–26th, a spare day on the 27th, dispatch on Monday the 30th. On the standard term the parcel reaches the branch by 3 December, with two more days in reserve. Allow 3–5 working days to make 150 mugs. Accept such an order by 17 November, three working days earlier.

Which blanks to order

On a MyPrint card, check the stock status and the dispatch date. «Expected» with a December date means the blank will not arrive in time.

A white metal sublimation mug with a black carabiner instead of a handle

Metal mug with a black carabiner, 300 ml

Diameter 7.5 cm · mug press · UAH 179

A white car thermo mug for sublimation with a black lid and handle

Car thermo mug, white, 450 ml

Diameter 8.5 cm · lid and side handle · UAH 255

A white sublimation mug with a dark green rim and handle

Mug with a dark green rim and handle, 330 ml

Ceramic, diameter 8 cm · UAH 58

A 56 mm button badge blank: a finished badge and the metal back with a pin

56 mm badge blank My Print mp56m

Insert 66.5 mm · 56 mm die of the Standart class · UAH 5.45

Brown cardboard box for a 330 ml mug

Box for a 330 ml mug, brown

Corrugated board · fits a 330 ml mug · UAH 6.50

Frequently asked questions

Can water be heated in the carabiner mug on a camping stove?

Do not put it on a fire or a stove: the print sits in a thin polymer coating. Boil water in a separate pot and pour it into the mug.

How should the mug and the thermo mug be cared for?

Wash by hand with a soft sponge and no abrasives. Do not put the metal mug or the thermo mug in a microwave. Put a card with these rules into the parcel.

A school brings children's drawings for soldiers. How should they be printed?

Ask for the originals or a daylight photo taken straight from above. A mug wrap is a long narrow strip, so take a drawing that is wider than it is tall, or place two or three side by side. A 56 mm badge takes one drawing, with the main part inside the 52 mm circle.

The order came on 3 December. What can I still make?

A mug or a thermo mug from a blank on the shelf is done the same day; allow 1–2 hours for 50 badges, so your own city is fine. Another city works only if you ship the same day and the Nova Poshta calculator shows delivery by Saturday: between regional centres a parcel takes 1–2 days.

The client also wants a key ring with a call sign. What do I make it on?

The «Sublimation key rings» section has a metal key ring with a 55 × 20 mm print area and a leather one with a 75 × 36 mm area. They are pressed in a flat heat press, not in a mug press. Without a flat press, offer a 56 mm badge instead.