Cover for sublimation 2D plastic (PC) for AirPods white (6417)

To apply an image to a plastic case, you will need:

• A heat press for t-shirts, a multi-functional heat press, or a vacuum heat press;
• A printer filled with sublimation ink;
• Sublimation paper;
• Heat-resistant tape;
• Cover for sublimation 2D plastic (PC) for AirPods white

The process of printing on a plastic case using sublimation consists of several steps:

1. Print the prepared image onto sublimation paper. Keep in mind that the image should be printed in mirror image. You can mirror the photo or image in a graphic editor, but it is more convenient to select the appropriate option in the print settings.
2. Allow the sublimation paper to dry. If printing was done on matte photo paper, this step can be skipped, as the ink is absorbed almost instantly.
3. Cut out the image and secure it to a metal plate using heat-resistant tape. Don't forget to remove the protective film from the plate beforehand.
4. Place the plate in a heat press and press the start button to begin the countdown timer.
5. After the set time has elapsed, a sound signal will sound. Remove the plate, peel off the paper, and let it cool.
6. Remove the protective film from the case blank, under which a layer of adhesive is applied, and attach the plate to the case.

The process is complete. Cover for sublimation 2D plastic (PC) for AirPods white is now not just a sublimation blank, but a finished product with a unique image or photo.