Cover for sublimation 3D plastic for Samsung Galaxy S7 Glossy (4229)

To apply an image to a plastic 3D case, you will need:

• A 3D vacuum heat press;
• A printer loaded with sublimation ink;
• Sublimation paper;
• Thermal tape;
• Cover for sublimation 3D plastic for Samsung Galaxy S7 Glossy;
• A mold

The process of 3D printing on a case using sublimation consists of several stages:

1. Print the prepared image on sublimation paper. Keep in mind that the image should be printed in mirror image. You can mirror the photo or image in a graphics editor, but it is more convenient to mark the corresponding field in the print settings.
2. Let the sublimation paper dry. If printing was done on matte photo paper, this step can be skipped, as the ink is absorbed almost instantly into the paper.
3. Cut out the image and secure it to the case using thermal tape.
4. Put the case on a special mold.
5. Place the case with the mold in a heat press, turn on the vacuum, and press the start button with the countdown timer.
6. After the set time has elapsed, a sound signal will sound. Remove the case, remove the paper, and let it cool.

The process is complete. Cover for sublimation 3D plastic for Samsung Galaxy S7 Glossy is now not just a blank, but a finished product with a unique image or photo.